Construction & precast · Industrial AI

Precast concrete — CE marking stands on plant records.

Precast concrete makes parts that cannot be reworked: a badly cured prestressed beam or a panel full of voids is scrap by the ton. And CE marking under EN 13369 and CPR 305/2011 requires you to prove water-cement ratio, curing and rebar traceability piece by piece. These are iLEAN's documented cases in construction and precast.

‹ See other industries

Curing control and rebar traceability at a CE-marked precast concrete plant
Documented cases

10 real cases from this industry.

Each case is written for the person who runs that line — with the specific problem, how it fits the IRIS system and an impact estimate to be validated with your numbers.

Construction case

EN 13369 + CPR 305/2011 precast compliance

iLEAN Agents prepare the EN 13369 + CPR 305/2011 compliance dossier (FPC, ITT, DoP) for the auditor at a precast plant — the file…

See the case →
Construction case

Steam curing chamber control with AI

iLEAN Edge controls the steam curing ramp in precast concrete chambers to prevent microcracking, strength loss and…

See the case →
Construction case

3D dimensional control of TBM segments with AI

iLEAN Edge 3D-scans precast TBM tunnel segments and compares them against the BIM model before they leave the plant — so no defect…

See the case →
Construction case

Water-cement recipe control at the batching plant

iLEAN Brain adjusts the recipe and water-cement ratio at the precast batching plant based on aggregate moisture measured in real time — the…

See the case →
Construction case

Climbing formwork management with AI

iLEAN Connect tracks the location, usage cycles and maintenance of the climbing formwork fleet between site and plant — no Excel, no calls,…

See the case →
Construction case

GRC panel void inspection with AI

iLEAN Vision detects voids and surface defects on precast GRC panels before packing and shipment to site. Less rejection by the…

See the case →
Construction case

MAG weld vision inspection on HEB profiles with AI

iLEAN Vision inspects the MAG weld seam on HEB profiles for industrial steel structures and flags defects for EN 1090 before…

See the case →
Construction case

CE marking of reinforced concrete pipes EN 1916 with AI

iLEAN Writer automates CE marking and the declaration of performance (DoP) for reinforced concrete pipes under EN 1916 and CPR 305 — no…

See the case →
Construction case

PPVC prefab bathroom module traceability

iLEAN Tracer gives every prefabricated PPVC bathroom module a unique identity from the plant to its slot on site — delivery and after-sales with a living file.

See the case →
Construction case

Prestressed precast beam traceability with AI

iLEAN Tracer records the prestressing of precast beams strand by strand for audits and the declaration of performance (DoP). No parallel Excels,…

See the case →
Let's talk

Tell us your case and in 48h we'll send you the estimated ROI of this AI project for your plant.

We work on your plant's real data, not ours. Diagnostic with no commitment.

Request estimated ROI in 48h See other industries