iLEAN Connect · PLC connectors
Connect an industrial peeler to AI — plug & play iLEAN Connect connector
What matters from a connected peeler is not how it peels: it is how many kilos went in, how many came out and which delivery blew up the waste figure. All read without touching the machine.
The signal that matters on a peeler is a subtraction: kilos of raw material loaded against kilos of peeled product moving on down the line. Around that subtraction sit a handful of signals that explain it — actual dwell time in the drum, the setting it was running on, cycles completed per hour, water or steam consumption per cycle, and stoppages with their cause. None says much on its own; together, and tied to the incoming batch, they say exactly where the product is going.
With the peeler connected, the line manager stops seeing a machine that runs and starts seeing a ranking: peeling yield per delivery, per grower, per variety and per size grade. The setting that performed on Tuesday performs worse on Thursday, and the raw material behind it is written down. The iLEAN agent flags a delivery running below that product's usual behaviour, without waiting for the waste count at the end of the shift.
The connection path depends on the machine you own: some peelers are electromechanical with nothing to read but their own cabinet, others are recent units with an embedded PLC under the builder's housing. In the first case the panel is read by camera, or the weights, or the paper log filled in by hand today; in the second, the controller itself. Which one applies in your plant is settled by the technical visit, not by you.
The decision the data unlocks is always the same and always expensive: if the loss belongs to the machine, you retune the setting or change the abrasive element; if it belongs to the raw material, you take it to the purchasing table with the last deliveries' figures in front of you.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
My peeler has no weighing at the infeed — can yield still be measured?
Yes, using data the plant already produces: the batch delivery note, the number of crates or bins loaded, the weight of peeled product on the next scale. The scope document defines where each kilo of the subtraction comes from; if adding a weighing point is worth it, it is stated there and priced in the same 24-hour quote.
Can I compare yield between growers or varieties?
That is the most common use. The batch only needs to enter the system identified — by log, by label or by selection on the panel — for the central memory to group yield by grower, variety, size grade and reception date.
More cases in connect any machine to ai
- Connect a fruit pulper to AI — plug & play iLEAN Connect connectorPulp obtained against waste ejected, and when the screen starts costing you money. Quoted in 24h, paid…
- Connect a fruit waxer to AI — plug & play iLEAN Connect connectorWax applied per tonne, uniformity across the shift and packhouse line stoppages. Quoted in 24h, running…
- Connect an industrial blancher to AI — plug & play iLEAN Connect connectorReal blanching time and bath temperature, batch by batch, recorded. Quoted in 24h, running in under 7…
- Connect a vegetable cutter to AI — plug & play iLEAN Connect connectorKilos per cut format, minutes lost on every disc changeover and blade wear. Quoted in 24h, running in…
- Connect a vegetable washer to AI — plug & play iLEAN Connect connectorWater per kilo washed, bath change cycles and jam stoppages, in real time. Quoted in 24h, running in…
- Connect ready meals machinery to AIRecipe as executed, chilling window recorded and unit-by-unit sealing across your line. Quoted in 24h,…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.