iLEAN Connect · PLC connectors

Connect a bowl cutter to AI — plug & play iLEAN Connect connector

Batter temperature at the end of the cycle, batch by batch and by recipe: the number that decides whether the emulsion holds or breaks.

On a bowl cutter the signal that rules is batter temperature at the end of the cycle. Around it sit the ones that explain it: knife and bowl speed per phase, number of revolutions, real cycle duration, vacuum if fitted, and the exact moment the operator decided to stop. They all already live inside the machine; the connector streams them out and stores them with the batch and the recipe attached to the reading.

What the production manager sees on the panel is the shift's list of batches with their exit temperature, and above it the range that recipe should respect. Batches outside the range show at a glance, not in a customer complaint three weeks later. The AI agent cross-references those cycles with operator, shift and bowl load, and flags the pattern when it drifts.

The decision it enables is pure process: tune the cycle by recipe instead of by each shift's judgment, see whether the culprit is incoming meat temperature or the number of revolutions, and stop arguing from memory. Downstream, the mixer and the smokehouse complete the batter's traceability.

Your machine connects, whether or not you know what is inside it

If it has no PLC

Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.

If the PLC is embedded and you don't know which one

That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.

If you do know the PLC

Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.

How it works

  1. Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
  2. Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
  3. Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.

What you get with the connector

  • A panel of your machine, always visible, with history and charts.
  • The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
  • An AI agent analyzing the data and flagging deviations.
  • A daily email summary of what happened on your line.
  • Optional push to your ERP.

The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).

How the guarantee works

Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:

  1. You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
  2. iLEAN quotes it within 24 business hours.
  3. If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
  4. iLEAN presents the integration to you, running.
  5. You confirm it does what you expected — the criterion is written into the scope document itself.
  6. Only then do you pay. Integrations 100% at reversed risk.

Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.

This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.

The price, in the open

Standard catalog connector

From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.

Custom integration

Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.

Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.

Why iLEAN can promise this

25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.

AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.

Frequently asked questions

Do we have to touch the PLC program?

No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.

What if the integration doesn't do what we expected?

You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.

What network requirements does it need?

An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.

What if my machine has no PLC?

It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.

Can batter temperature be read if the cutter does not display it?

Yes. When the machine does not expose it, a dedicated probe is fitted during the technical visit, and that probe feeds the same panel as everything else. The scope document states in writing what gets installed and what gets read.

Is the reading tied to the recipe and the batch?

Yes, that is the whole point. Every cycle is stored with its batch and recipe identification, so the history can be filtered by product and whole campaigns compared against each other.

Define your scope — quoted in 24 hours

This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.