iLEAN Connect · PLC connectors
Connect a meat band saw to AI — plug & play iLEAN Connect connector
Real blade hours since the last change, cuts per shift and the minutes the saw runs without cutting, visible on the cutting room floor.
A band saw gives off few signals, which is exactly why the ones it does give are worth reading: motor run and stop, accumulated blade hours since the last change, pieces or cuts per shift, and the minutes the machine is running but cutting nothing. They come from the existing control panel, from sensors added on the motor, or from a camera watching the panel when there is nothing to take electrically. Which of the three applies is settled during the technical visit.
On the panel, the cutting room supervisor sees something that today is written down nowhere: how many hours that blade has been on, which shift breaks them soonest, and how much of the shift the saw spent waiting for carcasses. The history lives in the iLEAN central memory, and when one saw starts behaving unlike its twins the agent says so before the day's output shows it.
The decision is concrete and made with numbers: change blades on real cutting hours instead of habit, and know whether the room's bottleneck is the saw or what reaches it. With four saws connected, the comparison between them is the diagnosis.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
Does the saw have to be modified to connect it?
No. Reading comes from the control panel it already has, from sensors added on the enclosure, or from a camera above the panel. The machine stays as it is, and the exact path is decided during the technical visit and written into the scope document.
I run several identical saws — is it worth connecting them all?
That is where it pays best: the panel compares them against each other and it becomes obvious which one stops most, which eats most blade and which cuts least per shift. Several identical machines negotiate volume pricing case by case.
More cases in connect any machine to ai
- Connect an industrial pastry mixer to AI — plug & play iLEAN Connect connectorTimes and speeds against recipe, motor load and bowl temperature. Quoted in 24h, running in under 7…
- Connect a viennoiserie proofing tunnel to AI — plug & play iLEAN Connect connectorReal temperature and humidity against the recipe, and real proofing time. Quoted in 24h, running in…
- Connect meat processing machines to AIReal injection rates, batter temperature, cooking and curing curves: every machine in one panel. Quoted…
- Connect a bowl cutter to AI — plug & play iLEAN Connect connectorEnd-of-cycle batter temperature, revolutions and cycle time for every bowl cutter batch. Quoted in 24h,…
- Connect a brine injector to AI — plug & play iLEAN Connect connectorThe real injection percentage batch by batch, not the recipe one. Quoted in 24h, running in under 7…
- Connect a clipper to AI — plug & play iLEAN Connect connectorClips per minute, jams, reel changes and air pressure from your clipper, in one panel. Quoted in 24h,…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.