iLEAN Connect · PLC connectors
Connect meat processing machines to AI — iLEAN Connect connectors
In a meat plant the margin is decided on four or five specific machines. Start with those.
A meat plant already knows what it produced. What it almost never knows is what each machine actually did with each batch: how much the injector really put in on Tuesday's run, what temperature the batter left the bowl cutter at, which program the tumbler truly ran against the one the recipe called for, what curve that batch lived through inside the drying room. The data exists inside the machines; it simply never leaves them.
Connecting does not mean changing the line. It means the signals the machine already produces — counters, weights, temperatures, pressures, cycle times, states and alarms — stream into the iLEAN central memory, show up in a panel with history and charts, and an AI agent flags the batch that drifts off pattern. The reading path is set during the technical visit, machine by machine.
Start where the data is worth money: the brine injector and its real percentage, the vacuum tumbler and the program it ran, the cooking oven and its yield loss, the curing chamber and its curve.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Machines in this sector
Meat band saw
Real blade hours since the last change, cuts per shift and the minutes the saw runs without cutting, visible on the cutting room f
See the connector → Meat processingIndustrial bowl cutter
Batter temperature at the end of the cycle, batch by batch and by recipe: the number that decides whether the emulsion holds or br
See the connector → Meat processingBrine injector
The real injection percentage, batch by batch and by product. That is exactly where the plant's margin is decided.
See the connector → Meat processingIndustrial clipper
How many pieces it really closed, how often it jammed and how much clip it used per batch: the micro-stop nobody writes down.
See the connector → Meat processingIndustrial smokehouse
The cycle the chamber really ran, not the one the recipe called for: temperature, humidity and time, phase by phase and trolley by
See the connector → Meat processingIndustrial meat mixer
How long each batch was really mixed, what temperature it ended at and who chose to stop: homogeneity measured instead of assumed.
See the connector → Meat processingX-ray bone detector
Not just how many rejects there were: which batch, which supplier and which point of the shift they came from.
See the connector → Meat processingSausage peeler
Pieces peeled, breakages and jams by calibre and by batch: the loss that happens inside the peeler itself.
See the connector → Meat processingMeat netting and tying machine
Pieces tied per shift and metres of netting or twine per piece, against what each format should be using.
See the connector → Meat processingVacuum tumbler
The program actually run against the recipe: revolutions, vacuum held, rest cycles and temperature, batch by batch.
See the connector → Meat processingBacon derinder
How much fat is leaving with the rind: the machine's real yield, shift by shift.
See the connector → Meat processingMechanically separated meat (MSM) separator
Yield on the bone going in, measured per batch instead of estimated at month-end: the signal that pays for the machine.
See the connector → Meat processingHigh-speed cold cuts slicer
The grams given away on every pack, multiplied by a full shift: the figure almost nobody watches and everybody pays.
See the connector → Meat processingHam cooking oven
The core curve of every trolley, the phases that were actually completed and the real cooking loss, batch by batch.
See the connector → Meat processingSausage curing chamber
The temperature and humidity curve of every batch, and the weight loss that goes with it, day by day.
See the connector →Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
More cases in connect any machine to ai
- Connect a filling injector to AI — plug & play iLEAN Connect connectorDose per nozzle, drift between nozzles and unfilled pieces. Quoted in 24h, running in under 7 days, and…
- Connect an industrial pastry mixer to AI — plug & play iLEAN Connect connectorTimes and speeds against recipe, motor load and bowl temperature. Quoted in 24h, running in under 7…
- Connect a viennoiserie proofing tunnel to AI — plug & play iLEAN Connect connectorReal temperature and humidity against the recipe, and real proofing time. Quoted in 24h, running in…
- Connect a meat band saw to AI — plug & play iLEAN Connect connectorReal blade hours, cuts per shift and idle minutes from your band saw, in one panel. Quoted in 24h, paid…
- Connect a bowl cutter to AI — plug & play iLEAN Connect connectorEnd-of-cycle batter temperature, revolutions and cycle time for every bowl cutter batch. Quoted in 24h,…
- Connect a brine injector to AI — plug & play iLEAN Connect connectorThe real injection percentage batch by batch, not the recipe one. Quoted in 24h, running in under 7…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.