iLEAN Connect · PLC connectors
Connect an industrial planetary mixer to AI — plug & play iLEAN Connect connector
Two batches of the same dough with the same mixing time can come out different. Motor load says so before the bench does.
A planetary mixer carries one under-used and very revealing signal: motor load across the batch. Its shape is the dough's signature — how long it takes to come together, when it reaches the point, how it evolves — and compared across batches of the same recipe it catches differences the bench only notices an hour later. Alongside it you read real time at each speed, batches per shift, pauses and bowl lifts, and the gap between one batch and the next.
On the panel the manager sees every batch next to its recipe reference: the ones cut short, the ones left running while waiting for space downstream, and the ones tracing a load curve unlike the usual. The iLEAN agent flags that last case — typically the one preceding a batch that misbehaves in the following process.
Industrial planetary mixers range from units with a panel and recipes to machines with three speeds and a selector. Both connect: through the controller if there is one, or by reading the cabinet, the drive and our own cycle sensors. What can be read on yours is determined at the technical visit.
The decision is repeatability: set the dough point from what the machine says rather than from the clock alone, and catch the odd batch while it can still be separated, instead of discovering it once it is spread through the finished product.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
What does motor load add if I already control the time?
Time says how long you mixed; load says what was happening to the dough meanwhile. It is the signal that separates two batches identical on paper and different on the bench, and with a few weeks of history the agent learns each recipe's normal curve.
Can each batch be tied to its finished product batch?
Yes, if the batch is identified on the line or in the production order. Every batch keeps its time, its recipe, its curve and its batch code, so working backwards from a finished-product incident is direct.
More cases in connect any machine to ai
- Connect a food-grade conveyor to AI — plug & play iLEAN Connect connectorWhere product piles up, where it runs short and what stops the line, with time and duration. Quoted in…
- Connect an ingredient mixer to AI — plug & play iLEAN Connect connectorRecipe as executed against recipe as written, batch by batch, with real times and weights. Quoted in…
- Connect an industrial labeling machine to AI — plug & play iLEAN Connect connectorPacks labeled against packs passed, reel-out stoppages and the time each changeover costs. Quoted in…
- Connect a tray sealer to AI — plug & play iLEAN Connect connectorCycles and trays sealed per format, tooling changeover stops and rejects. Quoted in 24h, running in…
- Connect an ultrasonic food cutter to AI — plug & play iLEAN Connect connectorPortions per piece, trim waste and blade cleaning stops, by format. Quoted in 24h, running in under 7…
- Connect a food X-ray inspection system to AI — plug & play iLEAN Connect connectorEvery reject with its time, batch and record, plus the rate per shift and product. Quoted in 24h, paid…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.