iLEAN Connect · PLC connectors
Connect SIMATIC S7-300/400 to AI — plug & play iLEAN Connect connector
Decades of service and a proven program that just works — now with a panel, an AI agent and a daily summary, without touching a single line.
The S7-300/400 is the European installed base par excellence: decades running automotive, steel, food and chemical lines, with programs refined over years that simply do their job. That installed base is the natural customer of the iLEAN Connect connector: the machine already tells the whole story — it just needs to be heard.
Reading goes over S7 Communication, the protocol these CPUs speak from the factory: the connector behaves as one more client of the CPU, and the program, the blocks and the engineering stay exactly as they are.
The result: the veteran line joins the same iLEAN central memory as the new ones, with its panel, its history, its AI agent flagging deviations and its daily email summary. Data from the 2003 machine is worth just as much as data from the 2023 one.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
My S7-300 has been in production for fifteen years — can it be connected?
Yes — that is exactly the installed base the connector exists for. It reads over S7 Communication, the factory protocol of these CPUs, and your proven program stays just as it is.
What happens to the data if I migrate the CPU someday?
The iLEAN central memory keeps the machine's full history: if the line later moves to, say, an S7-1500, the connector changes and the data stays right where it was.
More cases in connect your plc to ai
- Connect Siemens LOGO! to AI — plug & play iLEAN Connect connectorPumps, doors, HVAC: connect your LOGO! units to AI and stop losing that data. Quoted in 24h, running in…
- Connect SIMATIC S7-1200 to AI — plug & play iLEAN Connect connectorConnect your S7-1200 to AI without touching the program: panel, alarms, daily summary. Quoted in 24h,…
- Connect SIMATIC S7-1500 to AI — plug & play iLEAN Connect connectorRead signals, counters and alarms from your S7-1500 without touching the program. Quoted in 24h, running…
- Connect WAGO PLCs to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for WAGO PLCs: quoted in 24h, running in under 7 days, and you pay once you see…
- Connect WAGO PFC100 to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for WAGO PFC100: quoted in 24h, running in under 7 days, and you pay once you…
- Connect WAGO PFC200 to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for WAGO PFC200: quoted in 24h, running in under 7 days, and you pay once you…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.