iLEAN Connect · PLC connectors
Connect Phoenix Contact ILC to AI — plug & play iLEAN Connect connector
Your ILC installed base feeding the iLEAN central memory — panel, AI agent and daily summary — in under 7 days.
Phoenix Contact's ILC controllers have spent years running infrastructure, water treatment and industrial building sites — and they are still there, delivering. That installed base is the natural customer of the iLEAN Connect connector: the controller keeps doing its job, and on top of that its data starts working too.
Reading uses the protocols your ILC already speaks on site, with Modbus TCP as the usual path. Which signals, states, counters and alarms are read — and the criterion by which you sign off the integration — is written into the scope document.
With the connector running, each ILC gets a panel with history, an AI agent watching for deviations and a daily email summary. And the day the site migrates to PLCnext, the history accumulated in the central memory is preserved: the machine changes controller, not memory.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
My ILC has been in service for over a decade — can it be connected?
Yes — that veteran installed base is exactly the customer this connector exists for. Note the model in the scope form and you get the quote within 24 business hours.
What do I gain connecting the ILC now if I'll migrate to PLCnext someday?
The history. From day one the ILC feeds the iLEAN central memory, and when the migration to PLCnext arrives, that history is preserved: you start the new controller with years of data already banked.
More cases in connect your plc to ai
- Connect the Omron CP Series to AI — plug & play iLEAN Connect connectorConnect your compact Omron CP Series to iLEAN's AI: quoted in 24h, running in under 7 days, and you pay…
- Connect SYSMAC NX/NJ to AI — plug & play iLEAN Connect connectorConnect your SYSMAC NX/NJ to iLEAN's AI: quoted in 24h, integration running in under 7 days, and you pay…
- Connect Phoenix Contact PLCs to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for Phoenix Contact PLCs: quoted in 24h, running in under 7 days, and you pay…
- Connect Phoenix Contact PLCnext to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for Phoenix Contact PLCnext: quoted in 24h, running in under 7 days, and you pay…
- Connect Allen-Bradley PLCs to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for Allen-Bradley PLCs, ControlLogix to SLC 500: quoted in 24h, running in under…
- Connect CompactLogix to AI — plug & play iLEAN Connect connectoriLEAN Connect connector for CompactLogix over EtherNet/IP: quoted in 24h, running in under 7 days, and…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.