iLEAN Connect · PLC connectors
Connect MELSEC FX Series to AI — plug & play iLEAN Connect connector
The micro PLC of Japanese OEM machinery, online with AI without changing the machine.
FX2N, FX3U, FX3G… the MELSEC FX Series is the micro PLC that Japanese OEM machinery spread across factories worldwide: one of the largest installed bases in compact machines anywhere. That base is the iLEAN Connect connector's natural customer: every FX-equipped machine is a candidate for a panel, history and AI agent without changing the machine and without touching the program, reading over MC Protocol.
The typical case is the factory with dozens of machines of different ages: the connector brings them online one by one, each with its cycle counters, stops and alarms in the iLEAN central memory, and the daily summary reporting what every machine did. Ten identical machines do not cost ten fees: volume is negotiated case by case.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
I have dozens of machines with FX3U and FX2N units from different builders — how is that quoted?
List the families and the approximate machine count in the form: each type is built once and volume pricing is negotiated case by case on the whole set.
Is it worth connecting a fifteen-year-old machine?
That's where it shows most: the machine already produces every day, and the connector adds a panel, history and an AI agent watching it — without changing the machine. The 24-hour quote tells you exactly what it costs.
More cases in connect your plc to ai
- Connect Mitsubishi Electric PLCs to AI — plug & play iLEAN Connect connectoriLEAN connector for Mitsubishi Electric MELSEC PLCs: quoted in 24 hours, running in under 7 days, and…
- Connect MELSEC iQ-F to AI — plug & play iLEAN Connect connectorPut your MELSEC iQ-F (FX5) online with AI: quoted in 24 hours, running in under 7 days, and you pay once…
- Connect MELSEC iQ-R to AI — plug & play iLEAN Connect connectorPut your MELSEC iQ-R online with AI: quoted in 24 hours, running in under 7 days, and you pay once you…
- Connect MELSEC Q Series to AI — plug & play iLEAN Connect connectorYour MELSEC Q Series online with AI, no migration: quoted in 24 hours, running in under 7 days, and you…
- Connect Omron PLCs to AI — plug & play iLEAN Connect connectorRead signals, counters and alarms from your Omron SYSMAC PLCs with iLEAN Connect: quoted in 24h, running…
- Connect the Omron CJ Series to AI — plug & play iLEAN Connect connectorYour veteran CJ Series can report too: iLEAN Connect connector quoted in 24h, running in under 7 days,…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.