iLEAN Connect · PLC connectors
Connect an industrial convection oven to AI — plug & play iLEAN Connect connector
Two bakes of the same recipe are rarely identical. Connected, the oven writes down how they differed and what load each one carried.
From an oven you read the whole bake: recipe selected, real cooking time, chamber temperature profile, product probe where it is used, steam injections, door openings with their duration, and the dead time between bakes. That set is the difference between knowing that «fourteen bakes were run» and knowing how each one went.
On the panel the manager compares them: the day's first against the rest, the one opened three times against the one never opened, the one that waited twenty minutes loaded because packing was running late. They also see real occupancy — how many bakes ran half full — which is where much of the energy cost per kilo hides. The iLEAN agent flags a bake departing from its recipe's pattern.
Recent ovens have recipe control and plenty to expose; older ones, dials and a timer. Both connect: through their own control, through added chamber and product probes, or by reading the panel with a camera. The path is decided at the technical visit and written down before quoting.
With that, two decisions change footing: schedule the bake sequence around what the downstream line can actually absorb, and standardise your highest-volume recipe on what really happens inside the oven rather than on what the sheet says.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
Is the product probe recorded for each bake?
If the oven uses it and exposes the reading, yes: it is stored with the bake, its recipe and its batch. Where the probe is not integrated, adding our own reading is assessed at the technical visit; whatever can be read is written into the scope before quoting, not after.
Can we know how long product waited before going in?
Yes, if the previous point on the line is connected too: the central memory crosses one stage's outfeed with the next one's infeed and the waiting time appears by itself. It is one of the figures that surprises people most the first time they see it.
More cases in connect any machine to ai
- Connect a vegetable washer to AI — plug & play iLEAN Connect connectorWater per kilo washed, bath change cycles and jam stoppages, in real time. Quoted in 24h, running in…
- Connect ready meals machinery to AIRecipe as executed, chilling window recorded and unit-by-unit sealing across your line. Quoted in 24h,…
- Connect a continuous fryer to AI — plug & play iLEAN Connect connectorThe shift's oil curve, kilos fried per top-up and the real filtration cycle. Quoted in 24h, running in…
- Connect a cooling tunnel to AI — plug & play iLEAN Connect connectorEvery load with its entry, its exit and its real time inside the window, recorded automatically. Quoted…
- Connect a food-grade conveyor to AI — plug & play iLEAN Connect connectorWhere product piles up, where it runs short and what stops the line, with time and duration. Quoted in…
- Connect an ingredient mixer to AI — plug & play iLEAN Connect connectorRecipe as executed against recipe as written, batch by batch, with real times and weights. Quoted in…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.