iLEAN Connect · PLC connectors
Connect an olive stuffer to AI — plug & play iLEAN Connect connector
The anchovy paste consumed above target per batch is margin leaving without a trace on any log.
From a stuffer you read units stuffed, real paste or strip consumption per batch derived from hopper refills, the active grade and recipe, rejects for faulty filling, and synchrony with the pitter feeding it: how long it spends waiting for product and how long it spends holding the pitter back.
On the panel, the manager sees filling consumed per thousand units against theoretical, by product and by shift. It is a figure that exists in almost no plant today and it usually surprises in the first week. Beside it, how stops split between the two machines of the pair, which is what says which of them really limits the rate. The reading path is settled at the technical visit according to what the machine exposes.
The decision is about filling cost and capacity. Filling is expensive and is dosed with a margin so that no olive comes out empty; measured, that margin can be tuned. And knowing whether the bottleneck is the pitter or the stuffer avoids the wrong investment, which in a seasonal campaign is a mistake paid in full that same year.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
Can we know how much filling is over-consumed per batch?
Yes: hopper refills plus units stuffed give real consumption per thousand units, compared with the recipe's theoretical figure. That difference is the over-consumption, quantified.
Can we see whether the bottleneck is the pitter or the stuffer?
Yes, once both are connected to the same central memory: their timelines align and you see who waits for whom in each minute, with stops split between the two.
More cases in connect any machine to ai
- Connect pickling and vegetable preserve machinery to AIPasteurizers, pitters, stuffers and jar fillers, connected. Quoted in 24h, running in under 7 days and…
- Connect a jar filler to AI — plug & play iLEAN Connect connectorDrained weight, solid-to-brine ratio, rejects and format changes. Quoted in 24h, running in under 7 days…
- Connect an olive pitter to AI — plug & play iLEAN Connect connectorYield by size grade, breakage, jams and punch wear. Quoted in 24h, running in under 7 days and paid once…
- Connect a pickle tunnel pasteurizer to AI — plug & play iLEAN Connect connectorTemperature per zone, accumulated treatment per batch and jars per hour. Quoted in 24h, running in under…
- Connect fruit and vegetable machinery to AIReal yield per batch, waste and downtime across your produce line. Quoted in 24h, running in under 7…
- Connect an industrial citrus juicer to AI — plug & play iLEAN Connect connectorLitres of juice per fruit delivery, jam stoppages and yield drift through the day. Quoted in 24h, paid…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.