iLEAN Connect · PLC connectors

Connect your packaging line to AI — iLEAN Connect connectors

End of line is where cost per unit is decided: connect it and you see where it goes, machine by machine and shift by shift.

In packaging, almost all the money is lost in small amounts repeated many times: a few grams over in every bag, two extra minutes on every changeover, a forty-second stop nobody writes down because «the machine is running fine». None of those three shows up on the production sheet, and all three add up by the end of the month.

Connecting the line means reading from each machine what it already knows about itself — counters of good and rejected units, cause and duration of every stop, the active format or recipe, sealing temperatures, film consumption, actual weights against target — and streaming it into the iLEAN central memory. There it stops being a loose figure on one machine and becomes the full story of the shift.

What the supervisor sees then is a panel with the stop pareto by cause and by machine, the real duration of every changeover, the reject curve by hour and the average grams being given away on each SKU. And that decides something concrete: which machine earns Saturday's maintenance, which formats to group in the plan, and which adjustment pays back from the first week.

Your machine connects, whether or not you know what is inside it

If it has no PLC

Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.

If the PLC is embedded and you don't know which one

That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.

If you do know the PLC

Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.

How it works

  1. Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
  2. Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
  3. Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.

What you get with the connector

  • A panel of your machine, always visible, with history and charts.
  • The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
  • An AI agent analyzing the data and flagging deviations.
  • A daily email summary of what happened on your line.
  • Optional push to your ERP.

The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).

How the guarantee works

Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:

  1. You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
  2. iLEAN quotes it within 24 business hours.
  3. If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
  4. iLEAN presents the integration to you, running.
  5. You confirm it does what you expected — the criterion is written into the scope document itself.
  6. Only then do you pay. Integrations 100% at reversed risk.

Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.

This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.

The price, in the open

Standard catalog connector

From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.

Custom integration

Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.

Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.

Why iLEAN can promise this

25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.

AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.

Machines in this sector

Packaging

Vertical form fill seal (VFFS) machine

The machine that stops and gets readjusted most often in the day: connected, every stop and changeover is measured.

See the connector →
Packaging

Multihead weigher

The machine that gives money away in grams: connected, that giveaway gets counted in euros per month.

See the connector →
Packaging

Package leak detector

It already knows how many packs are bad; connected, it says when they started going bad and what changed just before.

See the connector →
Packaging

Industrial inkjet coder

The question that matters is not whether it prints, but whether what it prints matches the order running right now.

See the connector →
Packaging

Shrink wrapper

Connected, it answers what nobody knows for sure: how many of its stops are its own and how many are because no product arrives.

See the connector →
Packaging

Case packer

It almost never stops for a whole hour: it stops thirty times for a minute, and connected that finally gets counted.

See the connector →
Packaging

Palletizer

When the palletizer stops, the whole line behind it stops: it pays to know exactly where it jams and what that costs.

See the connector →
Packaging

Case erector

A small machine with an enormous ability to stop the entire end of line, and it almost never appears on the production sheet.

See the connector →
Packaging

Strapping machine

Strapping only gets discussed when a load arrives loose at the customer; connected, you know which pallets had trouble and when.

See the connector →
Packaging

Pallet stretch wrapper

Film is a consumable nobody watches until the invoice arrives: per pallet and per shift, you see where it is going.

See the connector →
Packaging

Bottle filler

A few extra millilitres per bottle are invisible to the eye; multiplied by a month's output, they are not.

See the connector →
Packaging

Capping machine

A head that under-tightens goes unnoticed in the plant: it gets noticed weeks later, in the customer's warehouse.

See the connector →

Frequently asked questions

Do we have to touch the PLC program?

No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.

What if the integration doesn't do what we expected?

You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.

What network requirements does it need?

An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.

What if my machine has no PLC?

It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.

Define your scope — quoted in 24 hours

This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.