iLEAN Connect · PLC connectors
Connect a bakery deck oven to AI — plug & play iLEAN Connect connector
Which deck runs cold and how long it takes to recover after each bake, with the setpoint right beside it.
On a deck oven, the setpoint on the display and what happens inside are two different things, and the baker knows it: there is one deck that always runs tight, another that recovers slowly from the third bake onwards, and a door that costs twenty minutes if it is left open. Connected, all of that stops being craft knowledge stored in one person and becomes a chart anyone can look at.
What is worth reading is top and bottom temperature of each deck against setpoint, the recovery curve after every load, steam injections, door-open time, bakes per deck and per shift, and energy consumption per bake. With that, the panel shows the oven the way the supervisor sees it: deck by deck and bake by bake, not as one average temperature.
The decisions are about product and about the bill: which deck needs maintenance before it ruins a bake, how to spread the load so no deck always works at the worst point of its curve, and what each rack of product costs in gas or electricity. The reading path is set by the technical visit; some ovens with digital control publish it, and on others the panel is read and probes are added.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
My oven is old and only has thermostats — can it be connected?
Yes. When there is no electronics to read, we fit our own probes per deck and complete it by reading the panel or the bake log. It is a common case and it requires changing neither the oven nor the way you work.
Can I compare decks against each other?
It is the first thing you see. Each deck has its own temperature series and its own recovery curve, so the differences between them surface on their own, even when they all show the same setpoint on the display.
More cases in connect any machine to ai
- Connect an industrial steam boiler to AI — plug & play iLEAN Connect connectorBurner hours, fuel per tonne produced and blowdowns. Quoted in 24h, running in under 7 days and paid…
- Connect industrial pastry and viennoiserie machinery to AIReal temperature, humidity, times and weights against the recipe on your pastry line. Quoted in 24h,…
- Connect an automatic croissant line to AI — plug & play iLEAN Connect connectorReal pieces per hour, weight spread and micro-stops on your line. Quoted in 24h, running in under 7…
- Connect a filling injector to AI — plug & play iLEAN Connect connectorDose per nozzle, drift between nozzles and unfilled pieces. Quoted in 24h, running in under 7 days, and…
- Connect an industrial pastry mixer to AI — plug & play iLEAN Connect connectorTimes and speeds against recipe, motor load and bowl temperature. Quoted in 24h, running in under 7…
- Connect a viennoiserie proofing tunnel to AI — plug & play iLEAN Connect connectorReal temperature and humidity against the recipe, and real proofing time. Quoted in 24h, running in…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.