iLEAN Connect · PLC connectors
Connect dairy machinery to AI — iLEAN Connect connector
From milk intake to the pallet: every vat, every tank and every filler reporting what it did on each batch.
In a dairy plant the missing data is rarely about the machine: it is about the batch. Which milk went in, into which vat, on what temperature curve, how many minutes it stayed inside the window the recipe calls for, what came out of the mould and what went down the drain. That thread exists today, scattered across one machine's chart recorder, another's screen and a third one's paper log — which is why nobody can close a day's yield until the month-end inventory lands.
The iLEAN Connect connector reads each machine in the room through whichever path that machine allows, and delivers everything into the same central memory: temperatures, times, counters, states, alarms and stoppages all land on one timeline. From there, yield stops being an estimate: litres in against kilos out, vat by vat and shift by shift.
What the production manager sees the next morning is concrete: which batches drifted out of their window and by how many minutes, which tank sat waiting, which filler spent more time in micro-stops than in producing, and where the loss went. And the room does not need to be new: pre-network machines connect all the same, through a camera on the panel or a photo of the paper log.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Machines in this sector
Cheese vat
Every vat of the day turned into a curve you can lay beside yesterday's, with its cutting point and its real yield.
See the connector → DairyCheese press
Which cycle was cut short, how long loaded moulds waited, and which pieces came out of it.
See the connector → DairyHomogenizer
The pressure actually held on each batch, and the trend that warns you before it drops.
See the connector → DairyAging tank
Every tank with its aging clock in plain sight, and the batch pulled out early flagged for you.
See the connector → DairyYogurt cup filler
The five causes eating your shift, ranked by minutes lost instead of by what anyone remembers.
See the connector → DairyButter churn
Why one churn takes twice as long as the last on the same recipe: the answer is in the motor curve.
See the connector → DairyMilk evaporator
When the run starts fouling, and what every extra hour is costing you in energy.
See the connector → DairyFreeze dryer
Long, expensive cycles that nobody watches at four in the morning, stored curve by curve.
See the connector → DairyCream separator
Desludge frequency tells you more about the incoming milk than any intake sheet does.
See the connector → DairyMilk filling machine
How much of the shift went into starting up, waiting for material and starting up again.
See the connector → DairyUltrasonic cheese cutter
The extra gram in every portion goes unnoticed on the scale, but not at the end of the month.
See the connector →Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
More cases in connect any machine to ai
- Connect a chocolate moulding line to AICross demoulding rejects with cooling tunnel temperatures and deposited weight per piece. Quoted in 24h,…
- Connect a chocolate tempering machine to AIKeep every batch's temper curve and know what happened the day the chocolate came out dull. Quoted in…
- Connect a confectionery cooling tunnel to AICompare real cooling time against the recipe when the line speeds up. Quoted in 24h, running in under 7…
- Connect an aging tank to AI — plug & play iLEAN Connect connectorReal aging hours and temperature band per tank. Quoted in 24h, running in under 7 days, paid once you…
- Connect an industrial butter churn to AI — plug & play iLEAN Connect connectorThe breaking point of every churn, measured and comparable. Quoted in 24h, running in under 7 days, paid…
- Connect a cheese press to AI — plug & play iLEAN Connect connectorEvery pressing cycle with its real curve and its stops. Quoted in 24h, running in under 7 days, paid…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.