iLEAN Connect · PLC connectors
Connect a continuous sterilizer to AI — plug & play iLEAN Connect connector
Which containers were inside when the chain stopped, with the exact time and the temperature profile of that moment.
In a continuous sterilizer, the treatment a container receives depends on where it was when something happened. A six-minute chain stop does not affect the shift's production: it affects the specific containers sitting in the heating zone at that moment. Connected, the system knows which ones they were, because profile, speed and clock share one timeline.
The signals read are zone temperature, pressure, chain or conveyor speed, the dwell time that follows, containers per minute, cooling zone conditions, and every stoppage with its duration. That last one is this machine's most valuable signal and the worst recorded today, because when the equipment restarts nobody writes down how long it was down.
The result is a continuous record, carrying a batch reference, consulted by batch instead of by paper roll. iLEAN captures, orders and preserves that data and makes it searchable; defining the thermal process, validating it and interpreting it against regulation belong to your quality department.
Your machine connects, whether or not you know what is inside it
If it has no PLC
Plenty of machines in production predate the network. They connect all the same: an industrial camera watches the panel and reads what it shows, or the paper logs filled in by hand are captured by photo. Without touching the machine and without affecting its warranty.
If the PLC is embedded and you don't know which one
That is the norm. The builder fitted it under the housing and the documentation never says. You do not need to know: we identify it during the technical visit and the scope follows from there. You do not have to research anything before writing to us.
If you do know the PLC
Even better: there is probably already a standard connector for that family. Check the PLC connector catalog.
How it works
- Define the scope. Tell us what you want to see from your machine in the form. The form itself is the scope document: no separate paperwork.
- Quoted in 24 hours. You receive the quote within 24 business hours. If your connector is standard, direct activation — from €79/month per machine.
- Running in under 7 days. From your approval of the quote, the integration is running in under 7 days. You pay once you confirm it does what you expected.
What you get with the connector
- A panel of your machine, always visible, with history and charts.
- The iLEAN central memory continuously fed with signals, states, counters, alarms and variables.
- An AI agent analyzing the data and flagging deviations.
- A daily email summary of what happened on your line.
- Optional push to your ERP.
The connector is the doorway to the rest of the system: when you need it, the same machine scales to iLEAN Edge (inline machine vision, millisecond loop) and iLEAN Agents (full-cycle agents on the central memory).
How the guarantee works
Every iLEAN Connect integration is contracted the same way, and the terms are right here in the open:
- You define the scope of the connection you want: which signals, states, counters, alarms and variables to read from your PLC or machine.
- iLEAN quotes it within 24 business hours.
- If you approve, iLEAN builds it in under 7 days. The clock starts at your approval of the quote.
- iLEAN presents the integration to you, running.
- You confirm it does what you expected — the criterion is written into the scope document itself.
- Only then do you pay. Integrations 100% at reversed risk.
Need the AI to also act on the line? Define it in the scope and we quote it in 24 hours all the same; the build time is agreed in the scope document.
This guarantee covers the standard data connector: reading signals, states, counters, alarms and variables, delivery to the iLEAN central memory, a panel with history and charts, an agent analyzing, a daily email summary and optional push to your ERP.
The price, in the open
Standard catalog connector
From €79/month per machine. Your machine always online in the central memory, a panel with history, an agent analyzing and a daily email summary.
Custom integration
Its price is the 24-hour quote. The build is quoted once; afterwards, your machine joins the same fee — from €79/month.
Several machines with the same PLC? Volume pricing is negotiated case by case — ten identical connectors do not cost ten fees.
Why iLEAN can promise this
25+ years integrating AI with plant automation. Every driver, every protocol, every quirk of every PLC family is solved because it was already solved in a real plant: at Tier-1 manufacturers across automotive, aerospace, food, pharma and chemicals, and at the industrial SMEs that supply them.
AI is one more sensor — one that sees. Your PLC receives iLEAN's signal the way it receives any sensor's.
Frequently asked questions
Do we have to touch the PLC program?
No. The connector reads non-intrusively: AI is one more sensor, and your control logic stays exactly as it is. Writing to the PLC only exists if you expressly request it in the scope document.
What if the integration doesn't do what we expected?
You don't pay for it. The scope document defines in writing what «does what you expected» means, and payment comes after you confirm it, watching the integration run.
What network requirements does it need?
An outbound path from the plant network to the iLEAN central memory, with no inbound access opened. The concrete architecture — zones, rings, who talks to whom — is detailed in the scope document.
What if my machine has no PLC?
It connects too: through a camera on the panel or a photo of the paper log, the same iLEAN Connect paths used by plants with pre-network machinery.
Is what happened during a chain stop recorded?
Yes: start time, duration, temperature and pressure of each zone throughout, and the production that was inside. It is precisely the case where a continuous record is worth more than a periodic reading.
Does this replace our process recording system?
It does not replace it and does not try to: it sits alongside. Your process system stays where it is; the connector carries the data to the central memory so it can be crossed with the rest of the plant, watched by an agent and consulted by batch.
More cases in connect any machine to ai
- Connect canning machinery to AISterilization curves per load, seam records and stoppages from your canning line, tied to the batch.…
- Connect an automatic can seamer to AI — plug & play iLEAN Connect connectorStoppages by cause, output per head and double-seam checks tied to the batch. Quoted in 24h, and you pay…
- Connect an industrial can washer to AI — plug & play iLEAN Connect connectorSpray temperatures, dosing, water per can and jams. Quoted in 24h, running in under 7 days, and you pay…
- Connect a canning exhaust box to AI — plug & play iLEAN Connect connectorTemperature, steam and real dwell time from your exhaust box, tied to the batch. Quoted in 24h, and you…
- Connect a rotary retort to AI — plug & play iLEAN Connect connectorEvery load's curve tied to its batch, idle time and cycles per shift. Quoted in 24h, running in under 7…
- Connect your confectionery and chocolate line to AITemper curves per batch, real cooling times and coating given away per piece: quoted in 24h and paid…
This form is the scope document: from what you write here, iLEAN prepares your quote. You have it within 24 business hours.
SIMATIC, S7 and LOGO! are trademarks of Siemens AG. Allen-Bradley, ControlLogix, CompactLogix, MicroLogix, Micro800 and SLC are trademarks of Rockwell Automation, Inc. Modicon is a trademark of Schneider Electric. MELSEC is a trademark of Mitsubishi Electric Corporation. SYSMAC is a trademark of OMRON Corporation. TwinCAT and EtherCAT are trademarks of Beckhoff Automation GmbH & Co. KG. X20 is a trademark of B&R Industrial Automation. AC500 is a trademark of ABB. PLCnext is a trademark of Phoenix Contact GmbH & Co. KG. WAGO and PFC are trademarks of WAGO GmbH & Co. KG. PACSystems and VersaMax are trademarks of Emerson Electric Co. PROFINET and PROFIBUS are trademarks of PROFIBUS Nutzerorganisation e.V. EtherNet/IP and CIP are trademarks of ODVA, Inc. OPC UA is a trademark of the OPC Foundation. Modbus is a trademark of Schneider Electric, licensed to the Modbus Organization. All other marks belong to their respective owners. iLEAN is not affiliated with, sponsored by, or endorsed by any of these manufacturers; their marks are used solely to identify the equipment and protocols iLEAN Connect connectors are compatible with.